Latest MegaDrum firmware version

Discussions related to MegaDrum Hardware

Re: Latest MegaDrum firmware version

Postby dmitri » Tue Nov 13, 2018 3:59 pm

karlarsch wrote:reverted to my last Config in my post above, the new firmware gives me dropouts (missing notes), maybe my device is too old.

If it is STM32F205 based then it is current. For all other MCUs Noise Filtering is not implemented.
If you set Noise Filter Level to 0 you effectively revert it to old behaviour. With Noise Filter Level set higher and with old config you may want to adjust Thresholds/DynTime/DynLevel to optimize triggering.
dmitri
Site Admin
 
Posts: 8654
Joined: Fri Aug 03, 2007 8:05 pm

Re: Latest MegaDrum firmware version

Postby karlarsch » Tue Nov 13, 2018 5:06 pm

My MCU is STM32F103RCT6. Is this compatible with the new firmware?
You built it in 2014.
Karl
karlarsch
 
Posts: 18
Joined: Tue Apr 01, 2014 3:25 pm

Re: Latest MegaDrum firmware version

Postby dmitri » Tue Nov 13, 2018 5:44 pm

It is compatible of course but Noise Filtering is implemented only in STM32F205. In STM32F103RCT6 and all other MCUs it is ignored and it is there only for compatibility with latest MDMFX.
dmitri
Site Admin
 
Posts: 8654
Joined: Fri Aug 03, 2007 8:05 pm

Re: Latest MegaDrum firmware version

Postby Rovalo » Wed Nov 14, 2018 9:37 pm

Dmitri, I have following thought.

Since all firmware versions work fine except for the last one, could next firmware version work again?

Could you rebuild the last version but slightly modified as a test case?
Kind regards, Rob.

MD STM32F205RCT6 v3 (STM32d_56) full kit with 1.8" colour LCD, PDX-8, KD8, FD8, 2xCY5, 5xCY8, CY12R, 5x MPS300 DIY upgrade with mesh head/Roland cone/dual zone, Steinberg UR22/UR44.
Rovalo
 
Posts: 111
Joined: Wed Jul 06, 2016 9:52 pm
Location: Netherlands

Re: Latest MegaDrum firmware version

Postby dmitri » Thu Nov 15, 2018 7:00 pm

Over weekend I'll compile a slightly different version.
dmitri
Site Admin
 
Posts: 8654
Joined: Fri Aug 03, 2007 8:05 pm

Re: Latest MegaDrum firmware version

Postby karlarsch » Thu Nov 15, 2018 7:09 pm

Top. Dmitri, You are amazing.
Karl
karlarsch
 
Posts: 18
Joined: Tue Apr 01, 2014 3:25 pm

Re: Latest MegaDrum firmware version

Postby Rovalo » Thu Nov 15, 2018 8:21 pm

Thank you in advance, I keep my fingers crossed.
Kind regards, Rob.

MD STM32F205RCT6 v3 (STM32d_56) full kit with 1.8" colour LCD, PDX-8, KD8, FD8, 2xCY5, 5xCY8, CY12R, 5x MPS300 DIY upgrade with mesh head/Roland cone/dual zone, Steinberg UR22/UR44.
Rovalo
 
Posts: 111
Joined: Wed Jul 06, 2016 9:52 pm
Location: Netherlands

Re: Latest MegaDrum firmware version

Postby dmitri » Sun Nov 18, 2018 7:44 pm

Try this firmware:
megadrumSTM32d_56_20181118.zip
You do not have the required permissions to view the files attached to this post.
dmitri
Site Admin
 
Posts: 8654
Joined: Fri Aug 03, 2007 8:05 pm

Re: Latest MegaDrum firmware version

Postby karlarsch » Mon Nov 19, 2018 11:27 am

Hi Dmitri,
could You compile it also in the STM-B-version?
Regards
karlarsch
 
Posts: 18
Joined: Tue Apr 01, 2014 3:25 pm

Re: Latest MegaDrum firmware version

Postby dmitri » Tue Nov 20, 2018 3:24 pm

Unfortunately this new algorithm cannot be supported in STM32F103.
dmitri
Site Admin
 
Posts: 8654
Joined: Fri Aug 03, 2007 8:05 pm

PreviousNext

Return to MegaDrum Hardware

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 96 guests

cron