Gunning Castable manufacturers

MegaDrum по-русски

Gunning Castable manufacturers

Postby ttfttg2 » Tue Aug 21, 2018 2:40 am

Gunning castable is made of specially selected raw materials including specific aggregate sizing, clays, cement and additives to ensure ease of placement by gunning methods. It can highly reduce installation time, cost and provide performance as good as refractory bricks.
Gunning castable is a tendency in the future, it can highly save the construction time because you do not need to wait for the cooling of the operating area.
Corundum based gunning castable is made of brown corundum or white corundum, corundum can be used in very high temperature, so corundum based gunning castable can be widely used in the high temperature area of steel plant and cement industry.
You can find technical date sheet of corundum based gunning castable as belows:
ItemTSGC90TSGC95
Max Service Temp ℃ 17501780
Bulk Density (g/cm3)
(Dried at 110℃)3.03.1
CCS 110℃
(Mpa) 1100℃
1500 ℃ 95
110
125100
115
150
MOR 110℃
(Mpa) 1100℃
1500℃ 12
13
1413
14
15
Max Grain Size (mm)55
Chemical Analysis(%)
Al2O3
Fe2O3
90
0.5
95
0.2
Rebound Rate(%) 8-108-10
Note:
1.Above are average typical test data subject to reasonable variations.
2.CCS-Cold Crushing Strength. MOR-Modulus of Rupture.
Customization is welcome, you can send your required specification, we will make high quality castable as per your request.
Why Choose Us?
As we all know, raw material, formula, execution of the formula will decide the quality of castable.
In Tashan, we have our own lab to test the raw material to make sure all of them are high quality. And we have our stable supplier of raw material and have worked with them for more than 10 years.
Our factory are founded in 1998, with 20 years experiences of castable, and our engineers also worked in this area for more than 30 years, we believe our technical support and formula are top level.
We produce castable using our production line, the whole line is controlled by computer to make strict execution of the formula.
Photos Showing Our Factory and Equipment.



Customization is welcome, you can send your specification, we will make high quality castable as per your request.
We can provide free technical support no mater you buy or not.
If you meet some problems in using castable, you can send mail to us, we will try our best to help you.Gunning Castable manufacturers
website:http://www.tashanref.com/gunning-castable/
ttfttg2
 
Posts: 10
Joined: Tue Aug 21, 2018 2:38 am

Return to Russian

Who is online

Users browsing this forum: No registered users and 8 guests