Will MD support this setup

Anything at least distantly related to MegaDrum

Will MD support this setup

Postby BerlinKhan » Sat Aug 17, 2019 8:21 pm

Hello everyone,,
My MD is under construction atm. I plan to use it to replace my HD-1 module which is a bit limited.
From what I read on many forum, there is one main issue when doing so, with the Kick pedal. It seems it is not using a piezo but a variable resistor.
So after few search I found one guy that might have found a solution, here is what is says :
play sweepstakes online for money

"Presumably the HD-1 pedal doesn't use a piezo which is required by the TD-6 kick input. Try connecting the HD-1 pedal to the TD-6 HH CTRL input and assign a kick sound to the HH input (HH:H03)."

Will i be able to do so with my MD, and still have my HH working (I asume there is only 1 HH ctrl) ?

Any sugestion ?
Last edited by BerlinKhan on Mon Aug 19, 2019 8:01 pm, edited 1 time in total.
BerlinKhan
 
Posts: 3
Joined: Wed Aug 07, 2019 7:26 pm

Re: Will MD support this setup

Postby dmitri » Sun Aug 18, 2019 9:58 pm

Yes, there is only one HiHat controller input. So you can only use it for a HiHat pedal or as "hacked" kick input.
dmitri
Site Admin
 
Posts: 8281
Joined: Fri Aug 03, 2007 8:05 pm


Return to Off topic

Who is online

Users browsing this forum: No registered users and 7 guests