Affordable DIY Drum Pad - PART 2 by:Jman 31

Anything at least distantly related to MegaDrum

Affordable DIY Drum Pad - PART 2 by:Jman 31

Postby jman 31 » Sun Aug 31, 2008 5:09 pm

Here is the Second installment of three for my affordable DIY Drum Kit. It is dedicated to an easy to build drum pad using standard easy to find items.

http://rapidshare.com/files/141580517/I ... 2_of_3.pdf

Jman 31

Once again if someone wants to upload this directly to the site feel free.
jman 31
 
Posts: 536
Joined: Thu Jul 10, 2008 10:51 pm
Location: USA

Re: Affordable DIY Drum Pad - PART 2 by:Jman 31

Postby Synthex » Sun Aug 31, 2008 5:50 pm

Here is the file :
Inexpensive_drums_Part_2_of_3.pdf
You do not have the required permissions to view the files attached to this post.
Synthex
 
Posts: 1471
Joined: Fri Oct 12, 2007 6:06 am
Location: France

Re: Affordable DIY Drum Pad - PART 2 by:Jman 31

Postby jman 31 » Sun Aug 31, 2008 6:05 pm

Thanks again synthex!
jman 31
 
Posts: 536
Joined: Thu Jul 10, 2008 10:51 pm
Location: USA

Re: Affordable DIY Drum Pad - PART 2 by:Jman 31

Postby CyberFly » Tue Sep 02, 2008 8:40 pm

Could place all 3 files in the first post?

I would like to build a pad set.
Nice and cheap for a newbe drummer. :P
100% DIY!
MegaDrum and a DIY e-kit.
CyberFly
 
Posts: 64
Joined: Fri Jun 20, 2008 2:59 pm
Location: The Netherlands

Re: Affordable DIY Drum Pad - PART 2 by:Jman 31

Postby jman 31 » Wed Sep 03, 2008 12:01 am

CyberFly wrote:Could place all 3 files in the first post?

I would like to build a pad set.
Nice and cheap for a newbe drummer. :P


Sorry man, I'm not quite sure what you are asking for with the 3 files.
jman 31
 
Posts: 536
Joined: Thu Jul 10, 2008 10:51 pm
Location: USA

Re: Affordable DIY Drum Pad - PART 2 by:Jman 31

Postby Ale.A » Wed Apr 22, 2009 8:07 pm

Mh... sorry for dumb question, can you explain me what the trim ring is? Something like a rim for car wheels? In amazon is in the electronic section... I'm confused
May I use it, considering the thickness and rigidity, as a "classic" drum rim? Actually it's not classic, it's electric but with the roland configuration, with foam cone in the center.
Do you think it could resist the tension of mesh head?
Thanks
Ale.A
 
Posts: 21
Joined: Mon Feb 02, 2009 8:37 pm


Return to Off topic

Who is online

Users browsing this forum: No registered users and 23 guests