Page 2 of 3
Re: Build a diy cymbal
Posted:
Wed Jan 30, 2013 7:42 pm
by drumdhiver
Hello !!!
Yes, thank, this one works!!!
If I hit my piezo, when I press a switch, I can affect the sound like I want through this on, I can see the red LED blink...
But, I don't understand how to "choke" the sound : when I hit and press, I want the sound become silent
I'm searching in Drummanager by changing parameter one by one... Dual or 3 way Yamaha or Roland... (but Roland give a hihat sound with the switch???)
So ... could you explain to me ?
Re: Build a diy cymbal
Posted:
Wed Jan 30, 2013 9:47 pm
by dmitri
Your software sound synthesizer must support MIDI Aftertouch for choking.
https://www.google.co.uk/#hl=en&tbo=d&s ... aftertouch
Re: Build a diy cymbal
Posted:
Wed Jan 30, 2013 10:14 pm
by drumdhiver
Yes, thank Dimitri
I would like to reply about it, I've just seen it must be that, my addictive drums is an old version...
Maybe I'll pass to BFD2, it could be better, no?
Re: Build a diy cymbal
Posted:
Thu Jan 31, 2013 8:16 am
by everson
You`ll be much better with SD2.3
That was my experience, at least ...
Re: Build a diy cymbal
Posted:
Thu Jan 31, 2013 5:56 pm
by drumdhiver
I'll try it, thank you all for your answers,
When i'll finish my drumkit, i'll probably post some photos
Re: Build a diy cymbal
Posted:
Fri Feb 01, 2013 10:01 am
by everson
Yes, please do.
We always like to see DIY builds
Re: Build a diy cymbal
Posted:
Sat Mar 23, 2013 9:57 pm
by drumdhiver
Hello!
Her's my drumkit!
I would like to thank Dimitri for his Megadrum's module
Re: Build a diy cymbal
Posted:
Sat Mar 23, 2013 9:59 pm
by drumdhiver
another one
Re: Build a diy cymbal
Posted:
Sat Mar 23, 2013 10:09 pm
by drumdhiver
actually, I've the ride set on dual zone with two piezos :
One on the edge, the other one is glue on a "isorel" ring (I dont know if it's the right word in english, isorel is a board of reconstitued wood, it's usually use for dress the back of a furniture)
The crash are single piezo with a possibility to build a choke (I will do this later...)
Re: Build a diy cymbal
Posted:
Sat Mar 23, 2013 10:10 pm
by dmitri
Very tidy! I wish my working place was as tidy as yours:)