Build a diy cymbal

Anything at least distantly related to MegaDrum

Re: Build a diy cymbal

Postby drumdhiver » Wed Jan 30, 2013 7:42 pm

Hello !!!

Yes, thank, this one works!!!

If I hit my piezo, when I press a switch, I can affect the sound like I want through this on, I can see the red LED blink...

But, I don't understand how to "choke" the sound : when I hit and press, I want the sound become silent

I'm searching in Drummanager by changing parameter one by one... Dual or 3 way Yamaha or Roland... (but Roland give a hihat sound with the switch???)

So ... could you explain to me ?
drumdhiver
 
Posts: 97
Joined: Tue Dec 04, 2012 9:37 pm

Re: Build a diy cymbal

Postby dmitri » Wed Jan 30, 2013 9:47 pm

Your software sound synthesizer must support MIDI Aftertouch for choking. https://www.google.co.uk/#hl=en&tbo=d&s ... aftertouch
dmitri
Site Admin
 
Posts: 8654
Joined: Fri Aug 03, 2007 8:05 pm

Re: Build a diy cymbal

Postby drumdhiver » Wed Jan 30, 2013 10:14 pm

Yes, thank Dimitri

I would like to reply about it, I've just seen it must be that, my addictive drums is an old version...

Maybe I'll pass to BFD2, it could be better, no?
drumdhiver
 
Posts: 97
Joined: Tue Dec 04, 2012 9:37 pm

Re: Build a diy cymbal

Postby everson » Thu Jan 31, 2013 8:16 am

You`ll be much better with SD2.3 ;) That was my experience, at least ...
My Videos
My kit: 6 DIY pads, CY5, PCY135, Hall sensor hihat, krigg - kick pedal trigger, megadrum
everson
 
Posts: 165
Joined: Mon Jan 02, 2012 10:14 pm

Re: Build a diy cymbal

Postby drumdhiver » Thu Jan 31, 2013 5:56 pm

I'll try it, thank you all for your answers,

When i'll finish my drumkit, i'll probably post some photos
drumdhiver
 
Posts: 97
Joined: Tue Dec 04, 2012 9:37 pm

Re: Build a diy cymbal

Postby everson » Fri Feb 01, 2013 10:01 am

Yes, please do.
We always like to see DIY builds ;)
My Videos
My kit: 6 DIY pads, CY5, PCY135, Hall sensor hihat, krigg - kick pedal trigger, megadrum
everson
 
Posts: 165
Joined: Mon Jan 02, 2012 10:14 pm

Re: Build a diy cymbal

Postby drumdhiver » Sat Mar 23, 2013 9:57 pm

Hello!

Her's my drumkit!

I would like to thank Dimitri for his Megadrum's module
You do not have the required permissions to view the files attached to this post.
drumdhiver
 
Posts: 97
Joined: Tue Dec 04, 2012 9:37 pm

Re: Build a diy cymbal

Postby drumdhiver » Sat Mar 23, 2013 9:59 pm

another one
You do not have the required permissions to view the files attached to this post.
drumdhiver
 
Posts: 97
Joined: Tue Dec 04, 2012 9:37 pm

Re: Build a diy cymbal

Postby drumdhiver » Sat Mar 23, 2013 10:09 pm

actually, I've the ride set on dual zone with two piezos :
One on the edge, the other one is glue on a "isorel" ring (I dont know if it's the right word in english, isorel is a board of reconstitued wood, it's usually use for dress the back of a furniture)

The crash are single piezo with a possibility to build a choke (I will do this later...)
drumdhiver
 
Posts: 97
Joined: Tue Dec 04, 2012 9:37 pm

Re: Build a diy cymbal

Postby dmitri » Sat Mar 23, 2013 10:10 pm

Very tidy! I wish my working place was as tidy as yours:)
dmitri
Site Admin
 
Posts: 8654
Joined: Fri Aug 03, 2007 8:05 pm

PreviousNext

Return to Off topic

Who is online

Users browsing this forum: Google [Bot] and 26 guests