Post your successful trigger settings

Discussions of any related software

Moderator: Related software moderators

Re: Post your successful trigger settings

Postby Ramsh » Tue Mar 01, 2011 6:44 pm

Sticky!

Here are my settings for triggering the acoustic drums, I muffled the drums a lot and sometimes it triggers very low after the first response. For that I just set battery so it won't trigger samples lower to a certain point. The megadrum is set to convert the midi data with all the dynamics and in battery the samples are triggered at a fixed volume.

http://www.vilemetalvids.com/upload/Ramsh/Kick.jpg
http://www.vilemetalvids.com/upload/Ramsh/Snare.jpg

The tom settings are similar to the snare
Ramsh
 
Posts: 44
Joined: Sun May 31, 2009 8:07 pm

Re: Post your successful trigger settings

Postby Ramsh » Fri Aug 12, 2011 6:11 pm

I got a pillows for the kickdrums and I use RT-10 trigger, alttrig is on threshold is at 40, masktime 8, dyntime 8 and minscantime at 100. Works pretty well.
Ramsh
 
Posts: 44
Joined: Sun May 31, 2009 8:07 pm

Re: Post your successful trigger settings

Postby angr77 » Wed Dec 28, 2011 11:02 am

Hi Ramsh.

I have been playing around with a snare, Rolands RT-10S trigger and MegaDRUM...I am using Addictive Drums as drumsound host.

I was looking on your settings - The highlevel value seems to be extremly high. Even if you hit the drum with full power...It wouldn't even generate a half amplitude of a midi-trigger signal in to Addictive Drum. (I am guessing that you compensate this in Battery)
So I changed the value to about 300 and also changed the curve to log3, to make it work better. (Retrigger down to 8, Threshold to about 30. Now, I am getting a better feeling...

However...I would like to investegate this more...What kind of drumsheads was you using? I am using Drum-Tec Pro MeshHeads...on a sonor 2007 snare.

Best Regards

Anders
Sonor, Drum-Tec heads, Roland CY14, CY12&15R, 2x BT-1 & VH11, 12, 13, Triggera D11, 2xD14, Pintech Dingbat, Letric Moo, Quartz triggers, 2xARM based MegaDRUM, PS Board, M-Audio FT Ultra 8R, Addictive Drums 2.1.6, Surface Pro 5 http://zourman.com
angr77
 
Posts: 622
Joined: Tue Nov 29, 2011 10:42 pm
Location: Stockholm, Sweden

Re: Post your successful trigger settings

Postby angr77 » Thu Dec 29, 2011 11:56 pm

Sorry - I must have been drunk in my last post...when checking the settings again...the Auto HighLevel was enabled...which makes the highlevel to go bananas. (Makes sence...)
However - I made some adjustments to the settings for my Roland RT-10S triggers.
It looks like this now. The Curve and the Retrigger is changed compared to Ramsh settings.

Anders

Capture.PNG
You do not have the required permissions to view the files attached to this post.
Sonor, Drum-Tec heads, Roland CY14, CY12&15R, 2x BT-1 & VH11, 12, 13, Triggera D11, 2xD14, Pintech Dingbat, Letric Moo, Quartz triggers, 2xARM based MegaDRUM, PS Board, M-Audio FT Ultra 8R, Addictive Drums 2.1.6, Surface Pro 5 http://zourman.com
angr77
 
Posts: 622
Joined: Tue Nov 29, 2011 10:42 pm
Location: Stockholm, Sweden

Re: Post your successful trigger settings

Postby angr77 » Thu Feb 09, 2012 3:18 pm

Hi! Here is some configuration files/settings for MegaDrum 32 using Roland RT-10S, RT-10K, VH-11 & CY8 triggers against XLN-Audio Addicted Drums.

MegaDrum configuration settings in Excel file format:
https://skydrive.live.com/redir.aspx?cid=d67448bff44ec617&resid=D67448BFF44EC617!1965&parid=D67448BFF44EC617!1958&authkey=!AJOrzaiAehzcYPE
(2012-02-05 - 90% ready..I am going to change some parameters and fine tune them a bit more.)

MegaDrum DMS settings file
https://skydrive.live.com/redir.aspx?cid=d67448bff44ec617&resid=D67448BFF44EC617!1967&parid=D67448BFF44EC617!1958&authkey=!ACw6DTaTW1MhCHw
(2012-02-05)

Addictive Drums ADMap File
https://skydrive.live.com/redir.aspx?cid=d67448bff44ec617&resid=D67448BFF44EC617!1966&parid=D67448BFF44EC617!1958&authkey=!AHdnrzax7uFTR5Y
Settings file for MegaDRUM and Addictive Drums 1.52 (2012-02-05)

Just for fun, I have created a small movie when testing the MegaDRUM device for the first time with the whole setup.
Please visit http://youtu.be/bFf-fU0nOtY to see it!

Best Regards

Anders
Sonor, Drum-Tec heads, Roland CY14, CY12&15R, 2x BT-1 & VH11, 12, 13, Triggera D11, 2xD14, Pintech Dingbat, Letric Moo, Quartz triggers, 2xARM based MegaDRUM, PS Board, M-Audio FT Ultra 8R, Addictive Drums 2.1.6, Surface Pro 5 http://zourman.com
angr77
 
Posts: 622
Joined: Tue Nov 29, 2011 10:42 pm
Location: Stockholm, Sweden

Re: Post your successful trigger settings

Postby dmitri » Thu Feb 09, 2012 4:15 pm

Very nice video! I guess, with your permission, I can place a link to your video and to your post in http://www.megadrum.info/content/megadrum-configuration
dmitri
Site Admin
 
Posts: 8662
Joined: Fri Aug 03, 2007 8:05 pm

Re: Post your successful trigger settings

Postby angr77 » Thu Feb 09, 2012 4:28 pm

Absolutly Friend!! Go ahead!

The only bad thing with the video is the guy behind the drums...

Best Regards

Anders
Sonor, Drum-Tec heads, Roland CY14, CY12&15R, 2x BT-1 & VH11, 12, 13, Triggera D11, 2xD14, Pintech Dingbat, Letric Moo, Quartz triggers, 2xARM based MegaDRUM, PS Board, M-Audio FT Ultra 8R, Addictive Drums 2.1.6, Surface Pro 5 http://zourman.com
angr77
 
Posts: 622
Joined: Tue Nov 29, 2011 10:42 pm
Location: Stockholm, Sweden

Re: Post your successful trigger settings

Postby angr77 » Sat Feb 18, 2012 2:41 pm

I have published a new package of my configuration files for MegaDrum and Addictive Drums.
I am still fine tuning my settings - any feedback are welcome!

MegaDrum configuration settings in Excel file format (2012-02-18)
https://skydrive.live.com/redir.aspx?cid=d67448bff44ec617&resid=D67448BFF44EC617!1978&parid=D67448BFF44EC617!1976&authkey=!AE5YL-H6ZcqcHt0

MegaDrum DMS settings file
The drum setup for MegaDRUM (2012-02-18)
https://skydrive.live.com/redir.aspx?cid=d67448bff44ec617&resid=D67448BFF44EC617!1981&parid=D67448BFF44EC617!1976&authkey=!AN-r3msdm--5rFc

Addictive Drums ADMap File
Settings file for MegaDRUM and Addictive Drums 1.52 (2012-02-18)
https://skydrive.live.com/redir.aspx?cid=d67448bff44ec617&resid=D67448BFF44EC617!1980&parid=D67448BFF44EC617!1976&authkey=!AGuPgazttmjgMlY

For you ones who wants my drumset + mixer settings etc for Addictive Drums. (Built on AD Core + Free drums – No ADPaks.)
AD Drum Preset Settings (2012-02-18)
https://skydrive.live.com/redir.aspx?cid=d67448bff44ec617&resid=D67448BFF44EC617!1979&parid=D67448BFF44EC617!1976&authkey=!AEAYGwy9OBTRy08

Steal with pride – drummer friends!!
For the complete story please visit, http://powerhell.wordpress.com/about/zourman/poor-mans-td-20/
Sonor, Drum-Tec heads, Roland CY14, CY12&15R, 2x BT-1 & VH11, 12, 13, Triggera D11, 2xD14, Pintech Dingbat, Letric Moo, Quartz triggers, 2xARM based MegaDRUM, PS Board, M-Audio FT Ultra 8R, Addictive Drums 2.1.6, Surface Pro 5 http://zourman.com
angr77
 
Posts: 622
Joined: Tue Nov 29, 2011 10:42 pm
Location: Stockholm, Sweden

Re: Post your successful trigger settings

Postby angr77 » Tue Apr 10, 2012 11:07 pm

Hi all!

You can now download my third compilation of MegaDRUM configuration files for Roland Triggers, MegaDRUM-32 & Addictive DRUMs (MDS, ADMAP, ADPreset and all configuration compiled in to a excel file).
You can find it at https://skydrive.live.com/redir.aspx?cid=d67448bff44ec617&resid=D67448BFF44EC617!1994&parid=D67448BFF44EC617!1991&authkey=!AHfcgMakL-NFcnc:

For full story please visit: http://powerhell.wordpress.com/about/zo ... ans-td-20/

Just for fun - I have also posted a new lousy movie on a drummer who had been focusing too much on tweaking...and forgot how to play...

http://www.youtube.com/watch?v=bjAVXuNHgyE&hd=1

Best Regards

Anders
Sonor, Drum-Tec heads, Roland CY14, CY12&15R, 2x BT-1 & VH11, 12, 13, Triggera D11, 2xD14, Pintech Dingbat, Letric Moo, Quartz triggers, 2xARM based MegaDRUM, PS Board, M-Audio FT Ultra 8R, Addictive Drums 2.1.6, Surface Pro 5 http://zourman.com
angr77
 
Posts: 622
Joined: Tue Nov 29, 2011 10:42 pm
Location: Stockholm, Sweden

Re: Post your successful trigger settings

Postby talrusher » Mon May 14, 2012 8:57 pm

angr77 wrote:Hi all!

You can now download my third compilation of MegaDRUM configuration files for Roland Triggers, MegaDRUM-32 & Addictive DRUMs (MDS, ADMAP, ADPreset and all configuration compiled in to a excel file).
You can find it at https://skydrive.live.com/redir.aspx?cid=d67448bff44ec617&resid=D67448BFF44EC617!1994&parid=D67448BFF44EC617!1991&authkey=!AHfcgMakL-NFcnc:

For full story please visit: http://powerhell.wordpress.com/about/zo ... ans-td-20/

Just for fun - I have also posted a new lousy movie on a drummer who had been focusing too much on tweaking...and forgot how to play...

http://www.youtube.com/watch?v=bjAVXuNHgyE&hd=1

Best Regards

Anders


hi,

think your drum sounds not as good as the potential of the megadrum is. maybe you set the falsetrigger supression a bit too high. on my diy kit i have set this to retrigger 1 dynlvl 0 and dyntime 8. with this i have no falsetriggering and the whole kit sounds amazing. the treshold is on all my pads 40 and the pads are really sensitive... but listen and look for yourself ;)
http://www.youtube.com/watch?v=uEEmrhHU ... 908F60CE11
Here I stand in the falling rain
There is no joy inside these tears
I see the world through a twisted and bitter stare
To be where I have been... to see what I have seen
Is it a dream?
Or can I believe...
The memories will haunt me for evermore
talrusher
 
Posts: 111
Joined: Sun Nov 27, 2011 2:27 pm
Location: Germany

PreviousNext

Return to Related Software

Who is online

Users browsing this forum: No registered users and 30 guests

cron