MuteHit in SuperiorDrummer3 - (Sys: ARM STM32F205RCT6)

Discussions of any related software

Moderator: Related software moderators

Re: MuteHit in SuperiorDrummer3 - (Sys: ARM STM32F205RCT6)

Postby airflamesred » Sun Mar 15, 2020 7:08 pm

Surely mute hit is a sample, it may well have a small tail but no reason to be a separate sample (makes no sense as it would not be controllable )

koby drums - Triggera krigg/Bix - megadrum - Kontakt........... Samples from all and sundry.
airflamesred
 
Posts: 1196
Joined: Fri Mar 30, 2012 1:58 pm
Location: Hammersmith

Re: MuteHit in SuperiorDrummer3 - (Sys: ARM STM32F205RCT6)

Postby jorgo » Mon Mar 16, 2020 10:28 am

Hi Dmitri,

MuteTail is:
- Hit Cymbal
- Press Choke
...Cymbal sound fades out

MuteHit is:
- Hold Choke
- Hit Cymbal
...a blocked Cymbal sound was played

MuteTail is Aftertouch controlled and works as expected.
MuteHit is (in SD3) a Note but MD sends Aftertouch messages
and in SD3 cause that a collision.
All following normal Cymbal Hits are still MuteHits.

In SD3 i can build a Aftertouch controlled MuteHit
but only if MD can send the DampenedNote Aftertouch messages on
there own Channels to avoid the colliosion on CC16.

Hope this explanation is clear enough - sorry my bad english...

Greetings from Germany
jorgo
 
Posts: 18
Joined: Wed Dec 11, 2019 2:01 pm

Re: MuteHit in SuperiorDrummer3 - (Sys: ARM STM32F205RCT6)

Postby dmitri » Mon Mar 16, 2020 6:49 pm

Would it be enough if Aftertouch messages (both On and Off) come only for bow/edge/bell Notes but never for DampenedNote ?
dmitri
Site Admin
 
Posts: 8654
Joined: Fri Aug 03, 2007 8:05 pm

Re: MuteHit in SuperiorDrummer3 - (Sys: ARM STM32F205RCT6)

Postby airflamesred » Mon Mar 16, 2020 9:49 pm

It seems to me that thd 2 separate samples are squarely aimed at being triggered from keyboard.

koby drums - Triggera krigg/Bix - megadrum - Kontakt........... Samples from all and sundry.
airflamesred
 
Posts: 1196
Joined: Fri Mar 30, 2012 1:58 pm
Location: Hammersmith

Re: MuteHit in SuperiorDrummer3 - (Sys: ARM STM32F205RCT6)

Postby jorgo » Tue Mar 17, 2020 7:40 am

@Dmitri:
The problem is the Edge-Aftertouch.
I have set a MidiFilter (in Cantabile) to
Route the Edge(59)-Aftertouch
to something unused by SD3 and Voilá...
MuteHit works without any collisions.
Thx for patience
You do not have the required permissions to view the files attached to this post.
jorgo
 
Posts: 18
Joined: Wed Dec 11, 2019 2:01 pm

Re: MuteHit in SuperiorDrummer3 - (Sys: ARM STM32F205RCT6)

Postby dmitri » Sun Mar 22, 2020 5:09 pm

Please test this firmware version:
megadrumSTM32d_56_20200322.zip

It does not use Aftertouch for Dampened Note.
You do not have the required permissions to view the files attached to this post.
dmitri
Site Admin
 
Posts: 8654
Joined: Fri Aug 03, 2007 8:05 pm

Re: MuteHit in SuperiorDrummer3 - (Sys: ARM STM32F205RCT6)

Postby jorgo » Mon Mar 23, 2020 12:44 pm

Hi Dmitri,
GOOD JOB - ;)
its working perfect for all 2zone Cymbals
and Yamaha 3zone Cymbals.

The Roland 3zone (2input-jacks) has no DampenedNote - right?
Is it possible to implement the DampenedNote
for this type of Cymbals?

Greetings...
jorgo
 
Posts: 18
Joined: Wed Dec 11, 2019 2:01 pm

Re: MuteHit in SuperiorDrummer3 - (Sys: ARM STM32F205RCT6)

Postby dmitri » Tue Mar 31, 2020 8:36 pm

I now officially released a new firmware (and MDMFX) version with the Aftertouch/Dampened Note change and with some other new features.
dmitri
Site Admin
 
Posts: 8654
Joined: Fri Aug 03, 2007 8:05 pm

Previous

Return to Related Software

Who is online

Users browsing this forum: Snor and 17 guests