rim/edge input registers as 0

Discussions of any related software

Moderator: Related software moderators

rim/edge input registers as 0

Postby VipeR » Sat Oct 28, 2017 7:56 am

Hey Guy,

I'm struggling with MDM again. I have a setup where I want to have a piezo on the head input, and one on the rim input. no mater what I try, the rim input will register as 0 (midi note), while I set it up for 60. It also gives an orange bar in the midi log. I've tried it with single piezo setting, dual and roland. all with the same result. I've copied the setting of two toms, which are wired the same way, and work that way, but the rim keeps registering as 0.

Help.....

Kind regards,

Viperr
VipeR
 
Posts: 26
Joined: Fri Jan 25, 2013 7:22 am

Re: rim/edge input registers as 0

Postby dmitri » Sat Oct 28, 2017 9:47 pm

Post a screenshot of the settings.
dmitri
Site Admin
 
Posts: 8654
Joined: Fri Aug 03, 2007 8:05 pm

Re: rim/edge input registers as 0

Postby VipeR » Sat Nov 04, 2017 5:48 pm

I don't know what it was. It seems to work now. Al I did was leave it alone for a couple of days. I tried turning it off before, but it didn't help then
VipeR
 
Posts: 26
Joined: Fri Jan 25, 2013 7:22 am


Return to Related Software

Who is online

Users browsing this forum: No registered users and 57 guests