Page 10 of 10

Re: MegaDrumManger is now ...

PostPosted: Sat May 26, 2018 4:40 pm
by Kabonfaiba
MidiLogBug.png


There is a MDMFX bug whereby if I go to options (don't change anything) and click OK.

I get +1 extra note added to the Midi Log.

In the attached picture, I've gone to options window three times - so now I get a groups of 4 notes or groups of 8 aftertouch notes in the log.

Error with upgrade when MIDI open

PostPosted: Tue Dec 18, 2018 10:30 pm
by Rovalo
During my firmware 20181031 upgrade issue I noticed that depending on MIDI open/closed the upgrade instructions screens are different.

In my case update is only successful when MD is manually forced in update mode as per first screen step 4. Otherwise I get an error message.

With MIDI closed:
MDMFX20181028-firmware-upgrade-screen-midi-closed.JPG

With MIDI open:
MDMFX20181028-firmware-upgrade-screen-midi-opened.JPG

With MIDI open after Start update MD automatically enters update mode followed by this error, timing issue?
MDMFX20181028-firmware-upgrade-error screen-midi-opened.JPG

Re: MegaDrumManger is now ...

PostPosted: Mon Feb 04, 2019 2:20 pm
by daniele99
Hi dmitri, i noticed that MDM and MD don't exchange some parameters like "Hihat input" number. I use Ch26 for Hat to avoid crosstalk inside the first mux and when I click "get all" in MDM it doesn't change from ch2. The same if i click "send all". The same issue with "AltEncoders" parameter. This happens clicking "Save to slot" from MDM to MD too. I will check for others non-exchanging params.
Another problem: did MDM starts with 100 slot by default? This setting makes Atmega644-MD behave like crazy.

Re: MegaDrumManger is now ...

PostPosted: Mon Feb 04, 2019 3:40 pm
by dmitri
1. I will check the HiHat input number. AltEncoders is not a parameter which can be changed externally with a sysex or MDMFX.
2. It doesn't start with config 100. If no config was saved before, MegaDrum just displays a non-existent slot number which I chose to be 100. It doesn't load from or saves to slot 100.

Re: MegaDrumManger is now ...

PostPosted: Mon Feb 04, 2019 9:04 pm
by dmitri
Hm, just tested HiHat input number and it works as expected. Changed it in MegaDrum and did 'Get' in MDMFX and it sees the setting changed. Changed it in MDMFX and sent it to MegaDrum and MegaDrum shows the setting changed.

Re: MegaDrumManger is now ...

PostPosted: Tue Feb 05, 2019 9:40 am
by daniele99
So i believe it's my fault. I'll check one more time. Thank you!

Re: MegaDrumManger is now ...

PostPosted: Tue Jun 15, 2021 5:16 pm
by paulritik_09
I'm trying to help here, to make the MDM-app a bit more robust, user-friendly and easier to use with less questions for the end user and improved usability. It's not that I do not respect or appreciate the work you do, or have done, It's just that I know it could be better and way more user-friendly.
It's my work to make things easier to use, I'm not just talking without any knowledge