by Rovalo » Tue Dec 18, 2018 10:30 pm
During my firmware 20181031 upgrade issue I noticed that depending on MIDI open/closed the upgrade instructions screens are different.
In my case update is only successful when MD is manually forced in update mode as per first screen step 4. Otherwise I get an error message.
With MIDI closed:
MDMFX20181028-firmware-upgrade-screen-midi-closed.JPG
With MIDI open:
MDMFX20181028-firmware-upgrade-screen-midi-opened.JPG
With MIDI open after Start update MD automatically enters update mode followed by this error, timing issue?
MDMFX20181028-firmware-upgrade-error screen-midi-opened.JPG
You do not have the required permissions to view the files attached to this post.
Kind regards, Rob.
MD STM32F205RCT6 v3 (STM32d_56) full kit with 1.8" colour LCD, PDX-8, KD8, FD8, 2xCY5, 5xCY8, CY12R, 5x MPS300 DIY upgrade with mesh head/Roland cone/dual zone, Steinberg UR22/UR44.