www.megadrum.info

Again I am taking Midi INIT Error from mdm. I changed usb and restart mdm and MD several times but no change. What could cause all these frustration? If I use midi ports I would have the same problem?

Please note that every time I use the same settings.

Using a DAW is not compulsary.

Any help how to load any samples from Drummic'a?

Is there a sample folder?

You'll need to assign those new outputs you have created, to 3/4 5/6 etc.

That's what I'been looking for, assigh the outputs but any drop down menu I choose on every channel there is nothing to choose but only for overdrive and some effects. As for samples I thought that drummic'a has doesn't it?

Thanasis wrote:Again I am taking Midi INIT Error from mdm. I changed usb and restart mdm and MD several times but no change. What could cause all these frustration?

It's hard to guess. Most likely you have other MIDI soft, e.g. Kontakt Player, which uses the same MIDI ports. This is why MegaDrum provides two In and two OUT MIDI ports so that one of IN/OUT ports is used exclusively for configuring MegaDrum from MDM.

If I use midi ports I would have the same problem?

If the problem is due to above possible cause then no.

Thanasis wrote:That's what I'been looking for, assigh the outputs but any drop I choose there is nothing to choose only for overdrive and some effects.

Bottom of the options tab

Thanasis wrote:As for samples I thought that drummic'a has doesn't it?

I don't understand what you want to do with the samples.

But how will I be able to hear any sound from my drumkit while I am playing?

Are you not hearing anything currently?

When I hit the cymbals I don't hear any sound at all. From Kontakt player I can play any sound from Drummic'a.