While MD Controller doesn't support new features

Discussions of any related software

Moderator: Related software moderators

While MD Controller doesn't support new features

Postby dmitri » Sat Feb 09, 2008 11:18 pm

You may have figured it out already but I'll mention it anyway.

As you know MD Controller by aquawicket doesn't yet support 32 inputs version of MegaDrum or 22 inputs version with new features.
Still you can load and save MegaDrum configuration using MIDI-OX's SysEx capabilities, but admittedly without a nice interface to edit the configuration on a PC. In short, you configure MegaDrum on its own, then set MIDI-OX to capture SysEx from MegaDrum MIDI port. From MegaDrum menu select SendSysExConf and press key UP. MIDI-OX will capture the dump and you'll be able to save the configuration dump to a file. Now if you want to load the saved configuration into MegaDrum you again use MIDI-OX to load the SysEx configuration dump and send it to MegaDrum.
dmitri
Site Admin
 
Posts: 8654
Joined: Fri Aug 03, 2007 8:05 pm

Re: While MD Controller doesn't support new features

Postby Synthex » Sun Feb 10, 2008 12:15 am

Is it possible to have a complete description of the dump file (features, variables, values, ...) ?
Synthex
 
Posts: 1471
Joined: Fri Oct 12, 2007 6:06 am
Location: France

Re: While MD Controller doesn't support new features

Postby dmitri » Sun Feb 10, 2008 12:35 am

For a start, see this http://www.edrummonitor.com/forum/viewtopic.php?f=4&t=7
MinScan adds one more byte to every input. Obviously 32 inputs version has more pads in the dump.
dmitri
Site Admin
 
Posts: 8654
Joined: Fri Aug 03, 2007 8:05 pm

Re: While MD Controller doesn't support new features

Postby Synthex » Sun Feb 10, 2008 12:41 am

Thanks.

It would be nice to have all the new features in a single document like in this one :
http://www.megadrum.info/menu_layout.pdf (2.Configuration via MIDI SysEx)
Synthex
 
Posts: 1471
Joined: Fri Oct 12, 2007 6:06 am
Location: France

Re: While MD Controller doesn't support new features

Postby dmitri » Mon Feb 11, 2008 8:37 pm

I've update the pdf file with new info.
dmitri
Site Admin
 
Posts: 8654
Joined: Fri Aug 03, 2007 8:05 pm

Re: While MD Controller doesn't support new features

Postby Synthex » Mon Feb 11, 2008 11:30 pm

dmitri wrote:I've update the pdf file with new info.

Thank you very much ! :)
Synthex
 
Posts: 1471
Joined: Fri Oct 12, 2007 6:06 am
Location: France

Re: While MD Controller doesn't support new features

Postby elrules » Tue Feb 12, 2008 3:29 pm

dmitri wrote:I've update the pdf file with new info.
Thanks, I was going to suggest you to update the manual, but you did it before. THanks
elrules
 
Posts: 629
Joined: Thu Nov 29, 2007 4:51 pm
Location: Murcia, Spain, Europe, The World

Re: While MD Controller doesn't support new features

Postby Synthex » Fri Feb 15, 2008 12:29 pm

Aquawicket seems to be unavailable to update the MD Controller.
Is it possible to retrieve the source code and to take up the torch ? ;)
Synthex
 
Posts: 1471
Joined: Fri Oct 12, 2007 6:06 am
Location: France


Return to Related Software

Who is online

Users browsing this forum: No registered users and 17 guests