Configuration overall for pads Bugs

Discussions of any related software

Moderator: Related software moderators

Configuration overall for pads Bugs

Postby rendelbello18 » Sat May 25, 2024 5:41 pm

Hello,

Is this normal that each individual setting configuration affect overall inputs? I notice after i configure and done each pad settings perfectly and click send all , the tom 1, snare and ride malfunction and not be accurate even i set it perfectly before and save it syx files individually. Thanks
rendelbello18
 
Posts: 8
Joined: Sat Apr 27, 2019 12:51 am

Re: Configuration overall for pads Bugs

Postby dmitri » Sat May 25, 2024 8:38 pm

No, it is not not normal. Before clicking 'Send All' check that settings in MDMFX for tom1, snare and ride as you you configured them previously. Also make sure all Misc settings are as when you configured tom1, snare and ride.
dmitri
Site Admin
 
Posts: 8683
Joined: Fri Aug 03, 2007 8:05 pm

Re: Configuration overall for pads Bugs

Postby rendelbello18 » Sat May 25, 2024 9:48 pm

But what is the problem? i check it and configure it by using fx manager. All toms are same pads and same configure, all cyms pads are same and same configured, and its works perfect but when all configuration are send all to module that bugs happen.
rendelbello18
 
Posts: 8
Joined: Sat Apr 27, 2019 12:51 am

Re: Configuration overall for pads Bugs

Postby dmitri » Sun May 26, 2024 8:05 pm

I don't exactly understand what you are actually doing to break the configuration.
What I can suggest is:
1. When everything is configured perfectly, do 'Get All' - that way MDMFX get an exact copy of the config in MegaDrum.
2. After that do 'Send All'.
Is configuration in MegaDrum broken after that?
dmitri
Site Admin
 
Posts: 8683
Joined: Fri Aug 03, 2007 8:05 pm

Re: Configuration overall for pads Bugs

Postby rendelbello18 » Sun May 26, 2024 9:20 pm

That exactly how i do it. Get all then send all also save to slot 1 after then close midi. But after that the ride has not triggering, the tom 1 has not responsive than tom 2 and tom 3 even its same configuration. The snare affected also. Did i do wrong ? I check my wiring and its right using your diagram. Can you check my mds file to your megadrum lite board? I will send.
rendelbello18
 
Posts: 8
Joined: Sat Apr 27, 2019 12:51 am

Re: Configuration overall for pads Bugs

Postby rendelbello18 » Mon May 27, 2024 12:26 am

heres my configuration mds file
rendelbello18
 
Posts: 8
Joined: Sat Apr 27, 2019 12:51 am

Re: Configuration overall for pads Bugs

Postby dmitri » Mon May 27, 2024 4:50 pm

rendelbello18 wrote:That exactly how i do it. Get all then send all also save to slot 1 after then close midi

This is not exactly what I advised you to do.
1. When everything is configured perfectly, do 'Get All' - that way MDMFX get an exact copy of the config in MegaDrum.
2. After that do just 'Send All'. Not 'Send All' and Save to Slot 1. Not close MIDI. Not anything else.
Is configuration in MegaDrum broken after that?
dmitri
Site Admin
 
Posts: 8683
Joined: Fri Aug 03, 2007 8:05 pm

Re: Configuration overall for pads Bugs

Postby rendelbello18 » Mon May 27, 2024 5:16 pm

Yes i tried but same issue.
rendelbello18
 
Posts: 8
Joined: Sat Apr 27, 2019 12:51 am

Re: Configuration overall for pads Bugs

Postby rendelbello18 » Mon May 27, 2024 6:05 pm

what do you mean broken?
rendelbello18
 
Posts: 8
Joined: Sat Apr 27, 2019 12:51 am

Re: Configuration overall for pads Bugs

Postby dmitri » Tue May 28, 2024 7:35 pm

It just make no sense.
When you do 'Get All' first and then do 'Send All' no config changes are made inside MegaDrum so there cannot be changes in behaviour.
Let's focus on Ride.
1. When everything is configured perfectly, do 'Get All' - that way MDMFX get an exact copy of the config in MegaDrum.
2. Is Ride still working?
3. Take a screenshot of MDMFX showing Ride settings.
4. After that do just 'Send All'.
5. Is Ride broken?
6. Take a screenshot of MDMFX showing Ride settings again.
dmitri
Site Admin
 
Posts: 8683
Joined: Fri Aug 03, 2007 8:05 pm


Return to Related Software

Who is online

Users browsing this forum: No registered users and 46 guests