Crossstick settings

Discussions of any related software

Moderator: Related software moderators

Crossstick settings

Postby coenw » Tue Nov 01, 2022 10:39 am

Hi all,

No matter what I try, I can't get the crossstick function to work with my megadrum module. I read up on the forum and it's obviously supported, but I can't get it to work. Dimitri refers to a BNote setting that I just can't find in my Megadrum editor (V 20200410).
I'd be nice if someone could point me in the right direction.

Thanks,
Coen
coenw
 
Posts: 2
Joined: Wed Jul 06, 2022 11:36 am

Re: Crossstick settings

Postby dmitri » Tue Nov 01, 2022 5:58 pm

It is Note/AltNote/Pressroll notes in the 3rd zone settings in MDMFX - they all should be set to a value for a crossstick sound. You will also need to fine tune MidPoint and MidPointWidth there.
dmitri
Site Admin
 
Posts: 8654
Joined: Fri Aug 03, 2007 8:05 pm

Re: Crossstick settings

Postby coenw » Wed Nov 02, 2022 8:48 pm

Thanks for your reply, Dmitri. I only get a crossstick sound when midpoint and midpoint width are both 100% to the right. Then all rim sounds are crossstick soundsA notch to the left results in rim sounds. Any other parameters that can be tweaked to get a good result?
coenw
 
Posts: 2
Joined: Wed Jul 06, 2022 11:36 am

Re: Crossstick settings

Postby dmitri » Thu Nov 03, 2022 12:09 pm

Very important for crossstick to work properly is that HighLevel on both head and rim inputs are set correctly, i.e. max velocity MIDI from each of these is reached only with hardest hits. Of course the hit on the head and rim must be simultaneous.
dmitri
Site Admin
 
Posts: 8654
Joined: Fri Aug 03, 2007 8:05 pm


Return to Related Software

Who is online

Users browsing this forum: No registered users and 34 guests