www.megadrum.info

Hey @Synthex

thanks a lot for that fast answer.

Maybe your right. But that means also the "Breakout Box" includes the complete technique attached to the drumrack. So If you do not like to disconnect every time all that jacks you have to transport this Box together with the drumrack on the road. I do not have a Case for my Pearl drumrack. So do you have experiences with this? Could this come to a problem?

My cable management allows me just to position this Box at the left down side to the rear pivot leg from my Pearl drumrack. And before this position I have a left-hand X-Snare drum installed. So, a direct service in the device is excluded. Maybe than this solution from @wazza187 with this external display and keyboard could be work for this.

I will think about this and will inform you. If I order your complete PCB 56i Kit how long does it takes to Germany?

Thanks with best regards

Thorsten
Germany

Trommeltotti wrote:Maybe your right. But that means also the "Breakout Box" includes the complete technique attached to the drumrack. So If you do not like to disconnect every time all that jacks you have to transport this Box together with the drumrack on the road. I do not have a Case for my Pearl drumrack. So do you have experiences with this? Could this come to a problem?

I do not have a case for my Roland drumrack, but there is no problem.
If all is handled with care, all is right.

Trommeltotti wrote:Maybe than this solution from @wazza187 with this external display and keyboard could be work for this.

Do you really need the display and the keyboard when you play drums ?
I think that all important things are on the PC or on the sampler.

Trommeltotti wrote:I will think about this and will inform you. If I order your complete PCB 56i Kit how long does it takes to Germany?

The delivery time is about one week for europe and less than two weeks for the rest of the world.

Dear @synthex,

you got an PM!

Best regards

Trommeltotti alias Thorsten

Thumbs up for Synthex!


Received my kit, took 2 weeks to ship from France to Canada! Well packed too!


Now the fun part.. soldering!

It wanted to acquire it

Dear @Synthex,

my Parcel arrived today! Many thanks for this!

It's all inside! very nice!

First question:

On some of the cliff stacked jacks (about three or four) there are one pin in addition to the other 12 pins. (completely in front) So they are not going on the PCB extension board? Can I remove those pins?

Thank you very much with best regards

Trommeltotti

Trommeltotti wrote:my Parcel arrived today! Many thanks for this!
It's all inside! very nice!

Great !

Trommeltotti wrote:Can I remove those pins?

Of course, you can.

Ok, thanks for information.

greats
Trommeltotti

I'd like to get the kit.
What's the protocol to buy?
What e-mail do I send the Paypal to?
I live in Newmarket ,Ontario Canada. is it still 119 euros?
Do you know if there are any border and taxes added?
Do you need my address for shipping or does paypal take care of that?
Thanks

thelanman wrote:I'd like to get the kit.
What's the protocol to buy?

I just send you all informations by private message.

thelanman wrote:I live in Newmarket ,Ontario Canada. is it still 119 euros?

Yes.

thelanman wrote:Do you know if there are any border and taxes added?

No additional taxes.