SysEx chain ID problem

Discussions related to MegaDrum Hardware

SysEx chain ID problem

Postby Renzback » Wed Mar 09, 2022 4:16 am

Hello!

Whenever I turn my MegaDrum module on, the module is set with the SysEx Chain ID = 255… This is weird, as you are not supposed to go over 127 in the first place… I always have to manually set it back to zero on the module itself so it can communicate with the Megadrum Manager FX… Any hint how I can store value zero permanently in the module? I can’t seem to find a way even though I wait a few seconds before changing pages, until the module says “config saved”. Not very important but a bit annoying…

Thanks in advance if you have the answer!
Cheers!
Renaud

PS: I just saw there is a recent firmware update, I’ll try that in the next few days.
Renzback
 
Posts: 5
Joined: Sun Apr 21, 2019 9:57 pm

Re: SysEx chain ID problem

Postby ignotus » Wed Mar 09, 2022 7:18 am

Set Autoload Conf to 'Yes' (in the module's menu)
If it ain't broken... fix it until it is.
ignotus
 
Posts: 881
Joined: Sat Nov 24, 2007 11:36 am

Re: SysEx chain ID problem

Postby Renzback » Thu Mar 10, 2022 9:55 pm

ignotus wrote:Set Autoload Conf to 'Yes' (in the module's menu)

Hi
Thanks for the hint. I already have this setting active. I will try and update the firmware over the weekend.
Renzback
 
Posts: 5
Joined: Sun Apr 21, 2019 9:57 pm


Return to MegaDrum Hardware

Who is online

Users browsing this forum: No registered users and 98 guests