Using sustain pedal (N.O. switch) to trigger a note

Discussions related to MegaDrum Hardware

Using sustain pedal (N.O. switch) to trigger a note

Postby jungleb » Mon Jul 19, 2021 9:34 pm

Is it able to use a sustain pedal (normally open switch) as an input on megadrum?

It seems that switch option is only available if a piezo is before it.
I attempted to plug it and tryied some configuration but with no success.

Does anyone knows if its possible and how to do it?

thank you

PS. I am loving the Mega 52 Input.

Thanks Dmitri!
jungleb
 
Posts: 21
Joined: Sun May 31, 2020 4:38 am

Re: Using sustain pedal (N.O. switch) to trigger a note

Postby dmitri » Wed Jul 21, 2021 6:25 am

You can use the pedal on switch inputs but indeed the the head/bow input must be configured as dual/piezo/switch. And you can use it to send Program Change message. See Function in https://www.megadrum.info/content/pads-settings
dmitri
Site Admin
 
Posts: 8654
Joined: Fri Aug 03, 2007 8:05 pm

Re: Using sustain pedal (N.O. switch) to trigger a note

Postby jungleb » Wed Jul 21, 2021 1:44 pm

dmitri wrote:You can use the pedal on switch inputs but indeed the the head/bow input must be configured as dual/piezo/switch. And you can use it to send Program Change message. See Function in https://www.megadrum.info/content/pads-settings


I got it!
Again, thank you so much!
jungleb
 
Posts: 21
Joined: Sun May 31, 2020 4:38 am


Return to MegaDrum Hardware

Who is online

Users browsing this forum: No registered users and 92 guests

cron