MD buttons functions are mixed up, can I reset

Discussions related to MegaDrum Hardware

Re: MD buttons functions are mixed up, can I reset

Postby Catfish » Fri Jan 03, 2020 10:15 am

dmitri wrote:Did you ever open the module and disconnect the buttons cable? If yes, then you probably re-connected it incorrectly.


Well...I didn't recall disconnecting the cable but...

I just disconnected it and spun the cable around to reverse the pin order, and what do you know!

Thanks for all your help! I feel a little sheepish now.

I did have another issue that I need to check up on. The last time I was using the MD I had an issue where all the channels suddenly jammed on at once at full velocity. Causing a cacophony! Hopefully that has resolved with the firmware update:) If not you may see me back on the forums!

Thanks again for your time:)

Michael
Catfish
 
Posts: 9
Joined: Fri May 06, 2016 1:58 am

Previous

Return to MegaDrum Hardware

Who is online

Users browsing this forum: No registered users and 104 guests