Page 4 of 4

Re: MD midi inactive after loading config with MD front cont

PostPosted: Wed Nov 06, 2019 4:14 pm
by Rovalo
dmitri wrote:When you load a config into MegaDrum using MDMFX it is not automatically saved into EEPROM. You have to use Save to Slot for that in MDMFX.


Maybe that is the confusion, I used MDMFX to load a config from slot in MD, so that config was already saved in MD EEPROM prior to loading it.

Re: MD midi inactive after loading config with MD front cont

PostPosted: Wed Dec 04, 2019 10:36 pm
by Rovalo
Hello Dmitri,

dmitri wrote:Please test this firmware version for the 'last loaded config' bit:
megadrumSTM32d_56_20191104.zip

When using the MD front controls the last loaded config using LoadConfig is reloaded after MD power cycle.
When using MDMFX the last loaded config with LoadFromSlot (so config was already saved to MD Eprom) is not reloaded after MD power cycle, but that is fine with me.

However, using MDMFX to save a config using SaveToSlot, it is saved but after 2 sec. MDMFX gets a SysexConfigCurrentTimout error, see snapshot.

This started with the MD firmware update to fix the config reload issue.

Please help.

Re: MD midi inactive after loading config with MD front cont

PostPosted: Thu Dec 05, 2019 10:21 am
by dmitri
I will look into it.

Re: MD midi inactive after loading config with MD front cont

PostPosted: Sat Dec 07, 2019 1:13 pm
by Rovalo
Thanks for the support!

If you want me to test something just let me know.

Re: MD midi inactive after loading config with MD front cont

PostPosted: Sun Dec 22, 2019 12:16 pm
by dmitri
Just to let you know that I have not forggoten about it. It's just very busy time at the moment and besides I was reckless enough that I broke a bone in my left palm which doesn't help.

Re: MD midi inactive after loading config with MD front cont

PostPosted: Sun Dec 22, 2019 10:51 pm
by Rovalo
Hello Dmitri, take your time!

I can work around the issue for a while.

Good luck with your hand and enjoy Christmas Holiday!