Zendrum inspired controller finished

[Rasmus]

Hello, just wanted to show my new padcontroller.
The pads are 50mm highly sensitive with great seperation.
Pads are 3d printed and if anyone is interested I can provide the stl files.
The piezo used are 35mm and the foam in the pads is 20mm very dense machine dampening foam.
Best Regards Rasmus

[airflamesred]

Looks great, what are the dimensions.

[Rasmus]

hello .... 40 x 48 x 7 cm.

Its Quite heavy because of the MDF board ... it improve the crosstalk between pads..

Rasmus

[ignotus]

Video!

[Rasmus]

Ok .. how do I share a video best here , can I use dropbox ?

Rasmus

[airflamesred]

Ok .. how do I share a video best here , can I use dropbox ?

Rasmus

Youtube Sir. the world needs to see this.

[Rasmus]

Hello, here is a little video clip .. there is a little latenzy on the sound .. but in real life it is very short

https://youtu.be/e_GO2h_jNRo

Rasmus

[airflamesred]

Great, where are the sounds from?

I've seen these before with them laid out with one under each fingertip

[Rasmus]

Hi ... the sounds are superior 3 with roots sticks library

here is one more clip

https://youtu.be/N6MsxotHwPI

[Rasmus]

Now with foldable stand