Optical hihat controller

Discussions related to MegaDrum Hardware

Re: Optical hihat controller

Postby gabriel1712 » Fri Sep 04, 2009 12:06 pm

ole_hansen wrote:someonePLEEEESE elaborate on what settings you have for the hihat controller, just to get it working in BFD or Superior.
i have some troubles going from open to closed (even though it shows up "smooth" on the MCT/MD "scale")


In BFD2 you have to put a mark in Engine->All hh variable or you won't get any closed sounds. Default it's off like this:
bfd2 variable.JPG
You do not have the required permissions to view the files attached to this post.
"the woods are lovely, dark and deep
but I have promises to keep
and miles to go before I sleep..."
gabriel1712
 
Posts: 195
Joined: Thu Mar 19, 2009 10:16 pm
Location: Denmark

Re: Optical hihat controller

Postby therapix » Tue Oct 27, 2009 10:02 am

Hello.

I want to make a DIY optical hi-hat pedal. I've been watching that components use to do it and I found this:

http://es.farnell.com/vishay-semiconduc ... dp/1470056

data Sheet:

http://www.vishay.com/docs/83795/tcnd5000.pdf

Think you can serve?

I wonder whether, if feasible, would serve the same schematic that dmitri suggested in this post or requires a different circuit?

greetings.
therapix
 
Posts: 24
Joined: Tue Jan 29, 2008 11:22 pm

Re: Optical hihat controller

Postby jman 31 » Tue Oct 27, 2009 11:13 am

therapix wrote:Hello.

I want to make a DIY optical hi-hat pedal. I've been watching that components use to do it and I found this:

http://es.farnell.com/vishay-semiconduc ... dp/1470056

data Sheet:

http://www.vishay.com/docs/83795/tcnd5000.pdf

Think you can serve?

I wonder whether, if feasible, would serve the same schematic that dmitri suggested in this post or requires a different circuit?

greetings.


That probably won't work. You have to have a way to get something in between them to turn off the transistor. That is a reflective type. I suppose you could use a mirror or something to go past them and reflect the light. I don't know though.
jman 31
 
Posts: 536
Joined: Thu Jul 10, 2008 10:51 pm
Location: USA

Re: Optical hihat controller

Postby Akkue39 » Fri Jul 16, 2010 1:05 pm

Hello to all

i use synthex 56K kit and for my optical hihat i use dimitris schematic on page 2 in this thread. Switch 1 on synthex kit is set to +5 V on ring. The LED is lightning and on the sleeve i get 0.2 to 3.77 V depending on the pedal position.

But there is no reaction in MD. Sometimes if i change LowLevel or HiLevel, the midi-led is lightning and in midox i can see CC messages. I made all possible changes e.g. AltIn=Yes/No, Impendance settings set to low/hi and so on but nothing happens.

What can i do to get the pedal working?

Many thanks and best regards
Akkue39
 
Posts: 16
Joined: Thu Feb 18, 2010 5:18 pm
Location: Germany

Re: Optical hihat controller

Postby dmitri » Fri Jul 16, 2010 1:17 pm

Akkue39 wrote:But there is no reaction in MD. Sometimes if i change LowLevel or HiLevel, the midi-led is lightning and in midox i can see CC messages.

Sometimes? If? You must adjust LowLevel or HiLevel to best suit your particular HiHat pedal and make sure that LevelsAuto is set to No before doing this this.
dmitri
Site Admin
 
Posts: 8654
Joined: Fri Aug 03, 2007 8:05 pm

Re: Optical hihat controller

Postby Akkue39 » Fri Jul 16, 2010 2:33 pm

Thank you, dimitri.

I made this:

AltIn=no

LowLevel=80
HiLevel=243

i got CC 01/02 permanently and the midi-LED stood lightning. No changes if i press or release the pedal.

LowLevel=244
HiLevel=477

i got CC 7e/7f permanently and the midi-LED stood lightning. No changes if i press or release the pedal.

LowLevel=80
HiLevel=477

i got CC 4b/4c permanently and the midi-LED stood lightning. No changes if i press or release the pedal.

if i decrease any of the above HiLevel values one point, the LED is off, i got no CC Mesages anymore but i got no changes if i press or release the pedal.
Akkue39
 
Posts: 16
Joined: Thu Feb 18, 2010 5:18 pm
Location: Germany

Re: Optical hihat controller

Postby dmitri » Fri Jul 16, 2010 2:43 pm

1. Make sure you use the low impedance HiHat pedal input
2. Set AutoLevels to No
3. Set LowLevel to 242, HiLevel to 243
4. Set AutoLevels to Yes
5. Press the pedal a few times.

What values do LowLevel and HiLevel have now?
dmitri
Site Admin
 
Posts: 8654
Joined: Fri Aug 03, 2007 8:05 pm

Re: Optical hihat controller

Postby Akkue39 » Fri Jul 16, 2010 2:57 pm

Sorry, the values won't change. Still 242 and 243

If i set AltIn to Yes,

LowLevel =242
HiLevel=892

but no pedal reaction
Akkue39
 
Posts: 16
Joined: Thu Feb 18, 2010 5:18 pm
Location: Germany

Re: Optical hihat controller

Postby dmitri » Fri Jul 16, 2010 3:46 pm

Akkue39 wrote:Sorry, the values won't change. Still 242 and 243

The cause is one of these:
1. You are not using the low impedance input.
2. There is no voltage change on the input when you press the pedal.
3. You connected the pedal incorrectly. It should be: sleeve - ground, ring - power, tip - input signal.
dmitri
Site Admin
 
Posts: 8654
Joined: Fri Aug 03, 2007 8:05 pm

Re: Optical hihat controller

Postby Akkue39 » Sun Jul 18, 2010 3:04 pm

i have my back to the wall. Let me show you some pictures:

4.97V between sleeve and ring

Image

3,69V between sleeve and ring in the jack

Image

3.31V between sleeve and tip in the jack

Image

if i press the pedal (in this case with my finger) i get 3.31V to 0.09V between sleeve and tip, depending on the pedal position

Image

Image

i hope you have any ideas more to solve my problem.

Best regards
Akkue39
 
Posts: 16
Joined: Thu Feb 18, 2010 5:18 pm
Location: Germany

PreviousNext

Return to MegaDrum Hardware

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 117 guests