www.megadrum.info

Wapata wrote:On the page 7, §4.7 of the MegaDrum instruction manual, can you tell us what's left ?

I don't understand the question.

And do you have a midi table that see us what input send what message (note) ?

You can assign any MIDI note to any input.

It's my fault, i didn't see that there is a dedicated instruction manual for the lite kit.
So now i can see witch inputs are in the MegaDrum but not in the MegaDrum Lite.

Now, what I have to figure out is do I really need MIDI DIN connection or not. After the number of inputs, it's the main difference I think.

If I use MegaDrum Lite, will a usb-to-midi cable connected to the computer will output the midi notes from MegaDrumManager ? With or without any other software ?

Wapata wrote:If I use MegaDrum Lite, will a usb-to-midi cable connected to the computer will output the midi notes from MegaDrumManager ? With or without any other software ?

Yes, if you will use some MIDI routing software and of course it will add latency.
Btw, at the moment I cannot offer Lite kits until I receive a new batch of PCBc.

YES !
It's for controlling lights during play sessions (one light per drum, one flash per hit, with this: http://www.sonelec-musique.com/electron ... i_007.html ) So the latency will be okay.

New question (i hope this is a good thread for this):
Car I use two MegaDrum with one computer ? Like master and student drum connected to the same software.

ps: I will buy it in two month, after moving in a new house, so, it's cool. Thanks for the information !

I have not tried it but I guess you can. You just have to choose right MegaDrum USB MIDI ports in your soft synth.

Thank you for the answers !
See you when i'll be in my new home !

Hi
Are the lite kit still available ? How can i order one ?

Yes, they're always available. You can PM if you want to order it.

vincenet wrote:Hello to everybody,

I am new user of the megadrum lite.

I try to connect my first pad (a Roland one) using ground (pin 15) and the Kick input (pin 37).

...

Post moved to this place with updated screenshot http://www.megadrum.info/forums/viewtopic.php?f=3&t=3053

You've started this thread in the wrong place really.
Firstly, Your MDM is not communicating with your MD. I can tell this by the fact that all the fonts are blue - they need to be black.
You should also end up with 3 gren lights at FW version, MCU and Config.
Press the 'Open Midi' button