fd-8 footcontroller inconsistent

Discussions related to MegaDrum Hardware

Re: fd-8 footcontroller inconsistent

Postby krickgpe » Sat Feb 28, 2015 1:21 pm

dmitri wrote:
krickgpe wrote:etween Tip and Sleeve open position : 0,28 (around)
Between Tip and Sleeve close position : 0,17 (around)

This is a very small difference. I suspect something is wrong with the controller. Disconnect the pedal from MegaDrum and measure resistance between sleeve and the tip in open and closed positions.


-0.01 for both..!!
I try with another FD-8 of a friend with a cable without 15k resistor, this a little video of what that I can see on MDM (midi monitor) and on the screen MD when I starting to setup the HH :
http://youtu.be/HfDY7H5oAPM
You will see the problem of the very low level of LowLevel and HighLevel...
Thanks
krickgpe
 
Posts: 139
Joined: Mon Dec 10, 2012 2:43 pm

Previous

Return to MegaDrum Hardware

Who is online

Users browsing this forum: No registered users and 113 guests

cron