Megadrum Gallery

Discussions related to MegaDrum Hardware

Re: Megadrum Gallery

Postby WalterWurst » Wed Apr 24, 2019 10:33 am

davvid72 wrote:...not the amateurs like us. :roll: Talking about work of encoders - I also used the multimeter to find out the vcc/gnd side of it.

Yeah. I´m the Über-amateur :lol: Didn´t help in the moment because I was too angry at me that I forgot the multimeter. That, and I did not know the rotary encoder was so simple to find out by myself. Lesson learned: cool down, go to sleep, try another day. And RTFM :mrgreen:.
WalterWurst
 
Posts: 5
Joined: Tue Mar 05, 2019 9:47 pm

Re: Megadrum Gallery

Postby studiolion » Fri Jan 17, 2020 8:16 pm

Here is my solution for the MD set!
check out the video also .
Cheers
https://youtu.be/iTQEnK3qeXI
You do not have the required permissions to view the files attached to this post.
studiolion
 
Posts: 12
Joined: Thu Jun 13, 2013 11:22 am

Re: Megadrum Gallery

Postby dsteinschneider » Wed Jan 22, 2020 1:06 am

I think I have finished building out my acoustic to electronic kit for the time being. The ride and hi-hat are Yamaha 3 zone. The crashes are all built from $12 Pintech practice cymbals with goedrums prewired piezos and mryk membrane switches for choke. The hi-hat also uses the project boxes I used for the cymbals (Polycase) for the hall effect sensor and TRS jack. Each shell in this Ludwig Accent Combo kit has a UFO Drums 3 ply mesh head, ebridge piezo unit and rim protector. The USB hub, laptop power adapter and Behringer UMC202HD are zip tied underneath an On-Stage MSA 5000 mic stand laptop attachment which is attached to a Pyle laptop stand with a Gator Frameworks Microphone Clip Quick Relase Stand Attachment (GFW-MIC-QRTOP). The MegaDrum is connected to the Pyle laptop stand with a zip tie.
Image
dsteinschneider
 
Posts: 71
Joined: Fri Jan 19, 2018 12:49 am

Re: Megadrum Gallery

Postby TeeJay » Sat Apr 04, 2020 9:28 pm

slayer666 wrote:Make this a sticky!

Hi, I finished my Megadrum today. It's been really easy thanks to Dmitri and Synthex for the fabulous All-in-one PCB and the usb midi.
I got some help making the pcb's for the jacks from a friend. (Tack Marcus!)

Here's My Megadrum:
Front.jpg
Usb-midi.jpg
Jacks.jpg
inside1.jpg


/Slayer666 \m/


How did you make that case?
TeeJay
 
Posts: 1
Joined: Sat Apr 04, 2020 9:21 pm

Re: Megadrum Gallery

Postby Marcin_kasz » Sun Nov 08, 2020 9:15 am

Hey, I dont see any STM32 version.

Does anybody tried to do it as DYI?

Is the software opensrouce?
Marcin_kasz
 
Posts: 1
Joined: Sun Nov 08, 2020 9:00 am

Re: Megadrum Gallery

Postby dmitri » Sun Nov 08, 2020 10:34 am

STM32 is only available in kits and module. MegaDrum firmware is not opensource but MegaDrumManagerFX is opensource.
dmitri
Site Admin
 
Posts: 8654
Joined: Fri Aug 03, 2007 8:05 pm

Re: Megadrum Gallery

Postby mrmoos » Mon Jan 25, 2021 3:20 pm

Here is my Megadrum Lite build!
Front:
Image
Back:
Image
Inside:
Image
mrmoos
 
Posts: 1
Joined: Thu Oct 15, 2020 6:30 pm

Re: Megadrum Gallery

Postby ibanman555 » Mon Jan 25, 2021 9:34 pm

Looks sharp! Nice work.
ibanman555
 
Posts: 276
Joined: Sat Jan 28, 2012 8:44 pm
Location: Upstate New York (Adirondacks)

Re: Megadrum Gallery

Postby patoriku » Wed Apr 14, 2021 10:30 pm

I'm new here. Looking to get into using megadrum.

Where did you get those pads from?


everson wrote:I detached the monitor`s bottom plate, and its "leg" is hollow. So I sticked a painting brush (yes, you read it right :D ) in the "leg" and its other side in the rack.
Let me know if you need clarifications ;)

BTW, here are some more pics:

Image

Image

Image

Image

Image

Image
patoriku
 
Posts: 1
Joined: Wed Apr 14, 2021 10:09 pm

Re: Megadrum Gallery

Postby ibanman555 » Sat Apr 17, 2021 2:00 am

These have an Everson emblem, who is actually a forum member here and at vdrums.com. These appear to be an acoustic to electric conversion where an acoustic shell is cut in half, a mesh head installed and a trigger installed, as can be seen here;

https://www.vdrums.com/forum/advanced/d ... on-build-2
ibanman555
 
Posts: 276
Joined: Sat Jan 28, 2012 8:44 pm
Location: Upstate New York (Adirondacks)

PreviousNext

Return to MegaDrum Hardware

Who is online

Users browsing this forum: Google [Bot] and 125 guests

cron