Megadrum Gallery

Discussions related to MegaDrum Hardware

Re: Megadrum Gallery

Postby alpanov » Fri Nov 18, 2011 10:08 am

Here is my DIY set. Snare drum and Kick — 12". Toms — 10". PEACE mesh heads were used.

Image

Image

Image

Image

More details and pictures are here (but in Russian only, sorry).
Last edited by alpanov on Fri Nov 18, 2011 4:00 pm, edited 1 time in total.
alpanov
 
Posts: 78
Joined: Wed Sep 22, 2010 12:38 pm
Location: Kiev, Ukraine

Re: Megadrum Gallery

Postby kupooglop » Fri Nov 18, 2011 3:10 pm

@alpanov - Very nice job! :D
kupooglop
 
Posts: 116
Joined: Wed Aug 25, 2010 10:33 pm

Re: Megadrum Gallery

Postby angr77 » Sun Jan 29, 2012 12:09 pm

MD_Sticker_Cover_2.png


MegaDRUM Stickers project...
I wanted some nice stickers on my MegaDrum box (It comes without) to make it look better. So I designed a front for the box in Adobe Illustrator.

I am still not 100 precent satisfied with the stickers...yet
•First i measured the box’s front plate and redraw it in Illustrator.
•Then I took a digital photo of the box and then cutted out the front panel in photoshop and pasted it in Illustrator into the drawn illustrator frontpanel.
•Now, I was able to redraw where all holes(LCD, Buttons etc) of the Megadrum should be located gray area as a markers in the front panel. (To be able to cut it out after printing the original)
•Then I added some nice sticker text to all buttons in the design and printed it out.

I have now continued the project and trimmed the design slightly. Print it on Inkjet Sticker Vinyl Film…Added some “clear” self adhesive sticker above it as protection. I have also made some adjustments to the length of the rotary encoders – cut them by 3 mm, painted all nuts and washers in black color.

I am not totally satisfied yet…stay tuned…updates will follow. Last I will add a LCD-frame in front of the LCD. I found one that I think will work at Conrads.se.
You do not have the required permissions to view the files attached to this post.
Sonor, Drum-Tec heads, Roland CY14, CY12&15R, 2x BT-1 & VH11, 12, 13, Triggera D11, 2xD14, Pintech Dingbat, Letric Moo, Quartz triggers, 2xARM based MegaDRUM, PS Board, M-Audio FT Ultra 8R, Addictive Drums 2.1.6, Surface Pro 5 http://zourman.com
angr77
 
Posts: 622
Joined: Tue Nov 29, 2011 10:42 pm
Location: Stockholm, Sweden

Re: Megadrum Gallery

Postby kupooglop » Sat Feb 25, 2012 9:54 pm

DIY A to E kick drum trigger that replaced my DIY practice pad kick drum trigger.
DSCI0266.jpg
DSCI0265.jpg
You do not have the required permissions to view the files attached to this post.
kupooglop
 
Posts: 116
Joined: Wed Aug 25, 2010 10:33 pm

Re: Megadrum Gallery

Postby angr77 » Sun May 13, 2012 10:08 pm

My MegaDRUM based drumset...
MD_RACK3.png

setup2.png


Check my project for a complete story!
You do not have the required permissions to view the files attached to this post.
Sonor, Drum-Tec heads, Roland CY14, CY12&15R, 2x BT-1 & VH11, 12, 13, Triggera D11, 2xD14, Pintech Dingbat, Letric Moo, Quartz triggers, 2xARM based MegaDRUM, PS Board, M-Audio FT Ultra 8R, Addictive Drums 2.1.6, Surface Pro 5 http://zourman.com
angr77
 
Posts: 622
Joined: Tue Nov 29, 2011 10:42 pm
Location: Stockholm, Sweden

Re: Megadrum Gallery

Postby everson » Mon May 14, 2012 7:55 am

My megadrum is "stock", built by dmitri, but here`s my kit. There`s an obvious lack of cymbals, but I`m working on that issue ...

Image

Image

Image

Image

Image
My Videos
My kit: 6 DIY pads, CY5, PCY135, Hall sensor hihat, krigg - kick pedal trigger, megadrum
everson
 
Posts: 165
Joined: Mon Jan 02, 2012 10:14 pm

Re: Megadrum Gallery

Postby deathbyart » Thu Jun 28, 2012 5:38 pm

[quote="everson"]My megadrum is "stock", built by dmitri, but here`s my kit. There`s an obvious lack of cymbals, but I`m working on that issue ...

Image

Everson,
How is your monitor attached to the rack? I have a Pearl Rack and would love to do that.
deathbyart
 
Posts: 9
Joined: Sat Nov 29, 2008 5:29 pm

Re: Megadrum Gallery

Postby everson » Thu Jun 28, 2012 6:29 pm

I detached the monitor`s bottom plate, and its "leg" is hollow. So I sticked a painting brush (yes, you read it right :D ) in the "leg" and its other side in the rack.
Let me know if you need clarifications ;)

BTW, here are some more pics:

Image

Image

Image

Image

Image

Image
My Videos
My kit: 6 DIY pads, CY5, PCY135, Hall sensor hihat, krigg - kick pedal trigger, megadrum
everson
 
Posts: 165
Joined: Mon Jan 02, 2012 10:14 pm

Re: Megadrum Gallery

Postby airflamesred » Thu Jun 28, 2012 8:20 pm

Lovely looking kit and interesting set up. Is that 4 toms across the front?

koby drums - Triggera krigg/Bix - megadrum - Kontakt........... Samples from all and sundry.
airflamesred
 
Posts: 1196
Joined: Fri Mar 30, 2012 1:58 pm
Location: Hammersmith

Re: Megadrum Gallery

Postby everson » Thu Jun 28, 2012 9:09 pm

Actually 5.
2x10", 2x12" and 1x14"
(and plus the 14" snare drum)
My Videos
My kit: 6 DIY pads, CY5, PCY135, Hall sensor hihat, krigg - kick pedal trigger, megadrum
everson
 
Posts: 165
Joined: Mon Jan 02, 2012 10:14 pm

PreviousNext

Return to MegaDrum Hardware

Who is online

Users browsing this forum: No registered users and 123 guests

cron