Page 14 of 16

Re: Updating firmware with protected bootloader.

PostPosted: Sat Jan 30, 2016 2:08 pm
by Thanasis
The following screen appears.No matter how much time I left it to do the update the bar remains at 0%. Any help?


Image

Re: Updating firmware with protected bootloader.

PostPosted: Sat Jan 30, 2016 3:51 pm
by Thanasis
All well, the mdfwupdate had collapsed. I restarted the pc and the mdfwupdate worked fine, Firmware update was done successfull

Re: Updating firmware with protected bootloader.

PostPosted: Sun Feb 04, 2018 6:33 pm
by Stipe25
I have the same problem as above poster. Tried updating the firmware after a long time. The last time all went without a problem. I have a new protected bootloader. Today I tried updating thru megadrum manager and nothing happened. Update in progress 0% for 2 hours. Then I tried updating thru cmd(mdfwupdate). Same thing. Progress 0%. Then I tried with MDUpdate app and the same thing happened. 0% progress and program hangs (not responding). I tried with 3 different usb cables, different usb ports, different computers. Windows7, windows 8.1, windows 10. Same thing.
One more thing: when I press update on PC, megadrum module restarts instead of updating. Any ideas?

Re: Updating firmware with protected bootloader.

PostPosted: Sun Feb 04, 2018 10:22 pm
by airflamesred
Are you sure the firmware is in the correct folder?

Re: Updating firmware with protected bootloader.

PostPosted: Mon Feb 05, 2018 4:46 am
by Stipe25
Yes.
Edit: Not just the update, nothing can be sent to megadrum. Manager reads the settings but can't send them back (hangs).

Re: Updating firmware with protected bootloader.

PostPosted: Mon Feb 05, 2018 4:15 pm
by dmitri
1. What is your current firmware version?
2. Describe in step-by-step what you do and what happens just like step-by-step instructions in the first post of the topic.

Re: Updating firmware with protected bootloader.

PostPosted: Mon Feb 05, 2018 8:51 pm
by Stipe25
1. My current firmware version is 20141022 (It's been a while)
2. - I hold the left button and power up megadrum
- I press the button up to choose 16Mhz
- I press the down button (message to start the update on pc appears)
- I start MDUpdate
- MIDI In and MIDI out are set to Megadrum MIDI USB
- I browse for the firmware bin which is in the same folder as MDUpdate
- I press "Run Megadrum Update" button

At this point Megadrum restarts
- A new window pops up: Updating megadrum, please wait...
Elapsed time 00:00
Estimated time 00:00
Remaining time 00:00

On both windows (MDUpdate and Update in progress) It says not responding

For other two methods of updating I followed instructions to the letter.

Re: Updating firmware with protected bootloader.

PostPosted: Wed Feb 07, 2018 1:50 pm
by Stipe25
Do you need any additional info? Thanks

Re: Updating firmware with protected bootloader.

PostPosted: Wed Feb 07, 2018 4:13 pm
by dmitri
You must use mdfwupdate.exe (not MDUpdate) as per instructions in the first post.

Re: Updating firmware with protected bootloader.

PostPosted: Wed Feb 07, 2018 4:32 pm
by Stipe25
Image

As described in my opening post, the same thing happens. It stays at 0% forever. As soon as I press enter megadrum restarts instead of updating. All the pc drivers are up to date ( checked with Driver Easy Pro app).