Fired up Megadrum and it's dead?

Discussions related to MegaDrum Hardware

Fired up Megadrum and it's dead?

Postby GreasyBumpkin » Sun Mar 22, 2020 1:20 pm

What's going on? I've rebooted it three times... Nothing...

I'm stuck inside with the fucking Corona virus and it seems like my module has gotten sick too.
You do not have the required permissions to view the files attached to this post.
GreasyBumpkin
 
Posts: 31
Joined: Mon Mar 04, 2019 7:38 am

Re: Fired up Megadrum and it's dead?

Postby dmitri » Sun Mar 22, 2020 5:07 pm

Boot it with default settings - RIGHT switch pressed while powering up.
dmitri
Site Admin
 
Posts: 8318
Joined: Fri Aug 03, 2007 8:05 pm

Re: Fired up Megadrum and it's dead?

Postby GreasyBumpkin » Thu Mar 26, 2020 3:46 pm

dmitri wrote:Boot it with default settings - RIGHT switch pressed while powering up.


this didn't resolve it. The module is completely unusable every time it's booted up, I have to load the editor, then detect the module and send my config file to the module, and it may or may not be usable, sometimes it sends MIDI but the display is faulty.

the module is about 2 years old now, is this expected with age? it's well looked after, no gigs.
GreasyBumpkin
 
Posts: 31
Joined: Mon Mar 04, 2019 7:38 am

Re: Fired up Megadrum and it's dead?

Postby dmitri » Thu Mar 26, 2020 6:48 pm

So, what does it show on the LCD when you boot with the RIGHT switch pressed?
What is MCU type? What is the firmware version?
dmitri
Site Admin
 
Posts: 8318
Joined: Fri Aug 03, 2007 8:05 pm


Return to MegaDrum Hardware

Who is online

Users browsing this forum: Baidu [Spider] and 166 guests

cron