If, for any reason, you cannot build a MegaDrum module yourself, I can build a module for you.
It takes less than a week for me to build and send a module.Updated on 07/10/2015
: Introduced a model in a full aluminium case and reduced the price for the model in an ABS case.Updated on 06/10/2014
: Introduced a new ARM version based on STM32F205RCT6. It runs at 120MHz compared to 72MHz for the older STM32F103RCT6 version.The ARM STM32F205RCT6 based 56 inputs module with built-in extended EEPROM in a full aluminium case shown here is 215GBP (British Pounds) plus shipping. Shipping to the UK - £15, to EU - £20, to the US and almost to any other country - £28. 19" rack mount ears are detachable and can be attached front or back.
The ARM STM32F205RCT6 based 56 inputs module with built-in extended EEPROM in an ABS case shown here is 205GBP 200GBP plus shipping. Shipping to the UK - £15, to EU - £20, to the US and almost to any other country - £28.
With an optional 1.8" colour 160x128 LCD (as seen in https://youtu.be/7tY2F42GBIY
) included it will cost 5GBP more.
With an optional 2.2" colour 320x240 LCD (as seen in https://youtu.be/pMp64BEYICM
) included it will cost 10GBP more.
With an optional Positional Sensing addon board included it will cost 25GBP more. See http://www.megadrum.info/forums/viewtop ... f=3&t=2052
for details about the Positional Sensing addon board.
For warranty conditions see http://www.megadrum.info/forums/viewtop ... f=3&t=1669(for a 32 inputs module see 32 inputs MegaDrum module for sale)
Depending on the availability I can build modules in an ABS case either in a black or grey case.
This is the main board which I use to build modules:
Modules have no labels on them but here is the description:
On the front (from left to right):
1. On/Off switch
2. MIDI LED
4. Controls: LEFT/RIGHT encoder with built-in LEFT button, UP/DOWN buttons, UP/DOWN encoder with built-in RIGHT button.
5. High/Low HiHat impedance selection. Default is Low (Up position) with AltIn in settings set to No.
On the back (from left to right looking from the back) top row:
1. HiHat pedal/controller input
On the back (from left to right looking from the back) bottom row:
II. MIDI In
III. MIDI Out
If you are interested, please send me a PM.
You do not have the required permissions to view the files attached to this post.